Your Creality printer, run by your AI.

Ask ChatGPT, Claude, Codex, Cursor, Gemini, Grok or any MCP agent for a part. Kiln designs it, checks it will print, and runs it on your Creality, from a K2 Plus to an Ender 3.

Set it up free →Find your model ↓

What your agent can do with your Creality

  • Newer machines over your network

    The K1, K2 and Hi, and most newer Ender-3 models, run Klipper, and Kiln connects to them over your own network.

  • Older machines through OctoPrint or USB

    Machines like the Ender 3, Ender 5 and CR-10 work through OctoPrint or a USB cable from a computer nearby.

  • Watches the print

    On models with a camera, your agent can look in while the print runs.

  • Tuned for your exact model

    Every model below has a print profile tuned for it, so your agent never starts from generic settings.

Kiln knows each machine’s real limits, material by material. Ask your agent before you buy a spool.

Find your Creality

Each one has its own page.

Don’t see yours? Most Klipper and OctoPrint machines work too. See every supported printer.

Setting it up

Kiln runs on a computer on the same network as your printer. Klipper-based Creality printers connect when their local connection answers on your network, and not every stock firmware turns it on. Kiln includes a check that tells you whether your printer is reachable and what to change if it isn’t.

Free and Pro run one printer at a time; you can own several and switch between them. To run several at once, see Kiln for print farms.

Questions

Does Kiln need Creality Cloud?

No. Kiln talks to the printer on your own network, or over USB for older models.

Does it work with my Ender 3?

Yes. Run it through OctoPrint, or plug the printer into a computer by USB, and Kiln drives it from there.

Will it print without asking me?

No. Kiln shows you the model, then waits for your yes before every print. You can say yes for the next two hours or the rest of the day so it stops asking for a while, and you can turn on auto-print yourself. Auto-print is off unless you turn it on.

Which AI apps does it work with?

ChatGPT, Claude Desktop, Claude Code, Codex, Cursor, Gemini, Grok, or any app that speaks MCP. On chatgpt.com, claude.ai, gemini.google.com and grok.com, the Kiln connector designs, checks and prices parts; to run your own printer, install Kiln on the computer next to it.

Set it up free →Using ChatGPT? →Using Claude? →Using Codex? →Using Cursor? →Using Gemini? →Using Grok? →Using OpenClaw? →

Kiln is independent, open-source software. It is not affiliated with or endorsed by Creality.